 |
| Quantity: | |
|---|---|
All size
GTI
Xingtai city,Hebei province, CHINA.
can customize
GTI
FREE
Manufacturer
The Bonded Seal was originally designed to replace copper type washers in high-pressure systems. Often used as bolt seals in hydraulic equipment, today bonded seals (commonly known as Dowty Seals) are finding usage in many and varied applications throughout various industries.
The Bonded Seal comprises a metal washer and an elastomeric ring bonded inside the diameter. The metal washer prevents over-compression and limits deformation of the elastomeric ring.
All size ranges and material combinations are available. This same basic concept can be used to produce customized shapes for specific applications in any of the combinations of rubber to metal or plastic bonding.
Bonded Seals are available with or without the self-centralizing lip
It is the compression of the elastomeric part between the faces of the parts on either side of the bonded seal that provides the sealing action.
The elastomeric material, typically nitrile rubber, is bonded by heat and pressure to the outer ring, which holds it in place.
This structure increases resistance to bursting, increasing the pressure rating of the seal.
Because the bonded seal itself acts to retain the gasket material,there is no need for the parts to be sealed to be shaped to retain the gasket.
This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings.
Some designs come with an additional flap of rubber on the internal diameter to locate the bonded seal at the centre of the hole,
these are called self-centring bonded washers.
| Product Name | Self-centring Bonded Dowty Seal Flattening Washer |
| Category | Hydraulic seals, Pneumatic seals, customize seals |
Type | Bonded seal |
Material | Stainless Steel,Nitrile Rubber |
| Propeties | High temperature, low temperature, high pressure, low pressure, friction resistance |
| Color | Blue |
| Sizes | Standard and customize |
| Temperature | -45℃ +200℃ |
| Miedum | Hydraulic oil, anti-fire fluid, water, gas etc |
| Pressure | 0-100MPa |
| Application | excavators, loaders, graders, dump trucks, forklifts, bulldozers, scrapers, mining trucks, cranes, aerial vehicles, garbage transfer vehicle, sliding cars, agricultural machinery, logging equipment, aircraft, motor,electronics industries,etc. |
The Bonded Seal was originally designed to replace copper type washers in high-pressure systems. Often used as bolt seals in hydraulic equipment, today bonded seals (commonly known as Dowty Seals) are finding usage in many and varied applications throughout various industries.
The Bonded Seal comprises a metal washer and an elastomeric ring bonded inside the diameter. The metal washer prevents over-compression and limits deformation of the elastomeric ring.
All size ranges and material combinations are available. This same basic concept can be used to produce customized shapes for specific applications in any of the combinations of rubber to metal or plastic bonding.
Bonded Seals are available with or without the self-centralizing lip
It is the compression of the elastomeric part between the faces of the parts on either side of the bonded seal that provides the sealing action.
The elastomeric material, typically nitrile rubber, is bonded by heat and pressure to the outer ring, which holds it in place.
This structure increases resistance to bursting, increasing the pressure rating of the seal.
Because the bonded seal itself acts to retain the gasket material,there is no need for the parts to be sealed to be shaped to retain the gasket.
This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings.
Some designs come with an additional flap of rubber on the internal diameter to locate the bonded seal at the centre of the hole,
these are called self-centring bonded washers.
| Product Name | Self-centring Bonded Dowty Seal Flattening Washer |
| Category | Hydraulic seals, Pneumatic seals, customize seals |
Type | Bonded seal |
Material | Stainless Steel,Nitrile Rubber |
| Propeties | High temperature, low temperature, high pressure, low pressure, friction resistance |
| Color | Blue |
| Sizes | Standard and customize |
| Temperature | -45℃ +200℃ |
| Miedum | Hydraulic oil, anti-fire fluid, water, gas etc |
| Pressure | 0-100MPa |
| Application | excavators, loaders, graders, dump trucks, forklifts, bulldozers, scrapers, mining trucks, cranes, aerial vehicles, garbage transfer vehicle, sliding cars, agricultural machinery, logging equipment, aircraft, motor,electronics industries,etc. |
