EXHAUST SPIRAL WOUND GASKET KIT

Gasket installation requirements:

1, the sealing gaskets and flange sealing surface should be clean

2, sealing gasket diameter should be smaller than flange seal face outside

and inside diameter should be slightly bigger than a pipe inside diameter

3.Sealing gasket pre-tightening force should not exceed the design rules

4, sealing gasket compression, it is best to use the torque wrench

5.Installing a sealing gasket, should be in order, in turn, tighten the nut

treatment to replace or adjust the sealing gasket

6. if there is any leakage, must be installed after antihypertensive